Comanche Collective Grip on Guardian Electric Manufacturing Guardian Electric Manufacturing - Comanche Collective Grip
All Categories > Motion Control Grips > V-22 Grips > First Generation V-22 Thrust Grip  > V-22 Flight Control Grip  > First Generation V-22 Control Grip  > Comanche Collective Grip  > Comanche Collective Grip  
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Comanche Collective Grip


    Download PDF Download PDF  
    Email Email This Page  
    Save To Favorites Save To Favorites
  


Designed for the Comanche series of helicopters, this collective grip brings high functionality to the pilot’s fingertips. The panel face is over 4.5 inches wide, including the lowest button position, and over 2.2 inches tall. This large surface can be modified to accommodate any number of switch configurations.

Made of high-quality aluminum, the Comanche Collective Grip can withstand the test of time in the most demanding aerospace application. Flexible paint schemes and engraving complement the design.

Comanche

larger image

Side View

larger image



Features · Specifications

Features
  • Classic collective grip design for the aircraft / defense industry.
  • Ergonomic design reduces fatigue and improves response time between functions.
  • High functionality, makes 13 separate switches available for use during flight.
  • Complies with all appropriate Mil-Specs.
  • Qualification available by similarity.
  • Multi-piece aluminum construction.
  • Left-hand collective control grip design.
  • Engraving and marking available on all surfaces.
  • Flying lead wire (typically 60”) or connector mounting available.
  • Switch locations that are not required can be plugged to present a uniform, smooth surface.

Specifications

Optional Switches1

 View 		With a modifiable panel, it is difficult to identify all the possible switch combinations. Shown here, the Comanche collective contains thirteen switches and one trigger. The thirteen switches may be selected from the entire range available: from simple pushbutton switches through the most complex four-way.

The flexibility in engraving also makes it easier to modify the base grip design to meet your design requirements. Guardian can engrave on the top, face panel, and curved surfaces of the collective grip with the notation and abbreviations required for your application.

The fixed position switches are the trigger, mini pushbuttons on the thumb-rest area (three different locations), and the mini 4- or 5-way on the thumb-rest position. The mini 4-way can be exchanged for a standard pushbutton.

Select from our entire range of switches including:
S-1 : Pushbutton switch.
S-2 : Two-position rocker switch.
S-3 : Three-position rocker switch.
S-4 : Mini 4-way switch.
S-5 : Mini 5-way switch.
S-6 : Large 4-way switch.
S-7 : Slider switch.
S-8 : ICS/ Radio rocker switch.
S-9 : Triple redundant potentiometer switch.
S-10 : Bat-handle toggle switch.
S-11 : Transducer switch.
S-12 : Castle-crown mini 4-way switch.
S-13 : Black cap pushbutton switch.
1 Click on link to view typical schematic.


 MORE IMAGES 

· Comanche Collective Grip

· Side View

· Front View

· Comanche Application

Request Information
Guardian Engineering and Manufacturing